Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Meguro, Yoshihiro; Sato, Junya
Dekomisshoningu Giho, (54), p.48 - 55, 2016/09
Various radioactive wastes, especially liquiform, pulverized or grained one, have to be immobilized in a disposal container, and methods such as cement solidification, bituminization, etc are so far examined and have been adopted. In recent years novel inorganic solidification materials have been developed. These are named Alkali-activated materials and so geopolymer. Mainly studies of geopolymer applying to radioactive wastes as a solidification material are under research and development stage, but the cases applied to solidification of the real radioactive waste increase a lot. In this report, we briefly explain about some research studies and practical examples of the geopolymer in the field of nuclear energy, particularly those of radioactive wastes generated in Fukushima Daiichi Nuclear Power Station.
; Kondo, Toshiyuki; *
JNC TN8440 2001-024, 210 Pages, 2001/08
JNC-TN8440-2001-024.pdf:24.99MB
In order to make this book reflect in the investigation which turned the bitumen solidification object to maintenance of the abandonment object technical standard on condition of carrying out subterranean disposal in the future - solidification - it created for the purpose of utilizing as precious sources of information, such as a nuclide inventory in the living body, group-izing of the past campaign required for typical solidification object selection, and information offer at the time of disposal examination. A development operation history collected so that histories including the shift action in an institution of the formation of discharge reduction of the characteristic of solidification object manufacture outlines, such as composition of the process of an institution and a solidification object and a storage actual result, the contents of an examination of the past campaign, and the solidification object manufactured based on topics or radioactive iodine and radioactive carbon etc., such as the past contents of an examination / operation, may grasp comprehensively in creation, and it carried out as the composition stared the trend of future disposal fixedly. It was a period (for 16 years) until an bituminization demonstration facility processing institution will start a cold examination from April (Showa 57), 1982, and it starts a hot examination from May 4, it starts solidification processing technical development operation from october 6 and it results in the fire explosion accident on March 11 (Heisei 9), 1997, and low level radioactivity concentration waste fluid was processed 7,438 m
, and 29,967 bitumen solidification objects were manufactured. According to the accident, it is necessary to hand it down to future generations with processing technology while the bitumen solidification object manufactured in 15 years although the bituminization demonstration facility processing institution came to close the mission holds information precious ...
Fukumoto, Masahiro; Nishikawa, Yoshiaki*; Kagawa, Akio; Kawamura, Kazuhiro
JNC TN8400 2001-002, 23 Pages, 2000/12
JNC-TN8400-2001-002.pdf:0.55MB
The soluble organic compounds generated by radiological degradation of asphalt (
ray) were confirmed as a part of influence of the bituminized waste degradation in the TRU waste repository. Especially, the influence of the nitrate was focused on. As a result, the concentration of the soluble organic compounds generated by radiological degradation of asphalt (10MGy, ray which is correspond to absorbed dose of asphalt for 1,000,000 years) were lower (each formic acid : about 50mg/dm, acetic acid : about 30mg/dm and oxalic acid : about 2mg/dm) than that of the formic acid, the acetic acid and the oxalic acid which Valcke et al. had shown (the influence of the organic at the solubility examination which uses Pu and Am). Moreover, the change in the concentration of TOC and the soluble organic compounds (formic acid, acetic acid and oxalic acid) is little under the existence of nitrate ion. That is, the formic acid and acetic acid which can be organic ligands were generated little by oxidative decomposition of asphalt in the process that nitrate ion becomes nitrite ion by radiation. The influence of the soluble organic compounds by the radiological degradation of the asphalt ( ray) on adsorption and solubility by the complexation of radionuclides in the performance assessment can be limited.
Department of Hot Laboratories
JAERI-Review 2000-015, 113 Pages, 2000/09
JAERI-Review-2000-015.pdf:6.09MB
no abstracts in English
Koyama, Tomozo; ; Omori, Eiichi; ; ; Shibata, Atsuhiro; Shigetome, Yoshiaki
JNC TN8410 99-027, 423 Pages, 1999/12
The bituminization demonstration facility of Tokai Reprocessig Plant had a fire and explosion incident. The cause of the incident was investigated. Also, the facility condition and release of radioactive materials were evaluated. The cause of the fire and subsequent explosion was determined in a two year investigation. The main cause of the fire was that the temperature of the bituminized product rose to an unusually high temperature by a physical heating phenomena inside the extruder, which was caused by the lowering the feed rate of liquid waste. A moderate chemical reaction in the bituminized product continued and consequently the bituminized product overheated and ignited. The cause of the explosion was the accumulation of flammable gases generated from insufficiently extinguished bituminized product in the filling room in which the ventilation system had been shut down. The flammable gas was ignited by another bituminized product that overheated to the flash point temperature. This report details the condition of the facility before and after the incident, cause of the incident, and an evaluated amount of released radioactive materials.
Miura, Akihiko;
JNC TN8410 99-046, 35 Pages, 1999/10
Judging from several evidences which are operators' testimony, observation result, and so on, the "Committee for an Investigation into the Fire and Explosion Incident at the BDF of the Reprocessing plant of Tokai Works" concluded another fire incident occurred in the filling room (R152) after the explosion (hereafter called second fire incident). This report explains the simulation result of second fire incident. Calculated air temperature and radiation intensity are used another calculations that indicate the thermal influence from the fire name to the extruder or neighboring drums. About second fire incident, calculated result indicates first fire occurred from the No.30104 drum that was produced in 30B or several drums including No.30104 drum. It is estimated that temperature and thermal runaway reaction was not due to fire of neighboring drum because the drum doesn't receive large influence thermally by radiation from the neighboring fire name. Each result suggests the all burnt 29B and 30B drums were filled at higher temperature than usual.
; Miura, Akihiko; ;
JNC TN8410 99-043, 135 Pages, 1999/10
All result of chemical analysis and operators observation suggest non-chemical mechanism raised the filling temperature of the bituminized product at the incident. We, Tokai reprocessing plant safety evaluation and analysis team, performed the experiment using laboratory scale extruder and viscosity measurement to explain the high temperature of mixture. The result of the experiment using laboratory scale extruder showed that the phenomena of salt enrichment and salt accumulation oceured and they raised mixture temperature at the decreased feeed rate. These phenomena depend on the feed rate and they have large contribution of heat transportation and rise of operational torque due to the friction between screw and mixture. Based on the experiment result and all information, we investigated the operation procedure, operational records and machine arrangement to try to explain the behavior of the mixture in the extruder. Judging from each torque and temperature behavior, we succeeded in explaining a sequential behavior in the incident. It is estimated that mixture temperature was raised by physical heat generation in the extruder and this report explains each operation, investigated result and estimated event sequences.
; Kubota, Mitsuru*; *; *
JNC TN8430 98-001, 12 Pages, 1998/11
Leaching experiments were performed with simulated nuclear waste glasses in silica saturated water at 90
C for periods of 28 days in order to clarify the alteration mechanism of waste glass under silica saturation. After leaching experiments, the depth profiles of some elements of glass surfaces were measured by ERDA and ESCA. Depth profiles of H and soluble elements, such as B and Na, for the simulated nuclear waste glass after leaching experiments demonstrated the formation of glass hydration layer and the depletion of soluble elements in the glass hydration layer. The results suggest that alteration of nuclear waste glass under silica saturation is attributed to glass hydration and the leaching behaviour of soluble elements depends on the growth of the glass hydration layer.
; Funasaka, Hideyuki; ; Koyama, Tomozo
PNC TN8600 97-007, 109 Pages, 1997/11
no abstracts in English
; Aoyama, Makoto; ; Yamanouchi, Takamichi
PNC TN8410 97-319, 143 Pages, 1997/10
The fire and explosion incident occurred at Bituminization Demonstration Facility of PNC Tokai Works on March 11, 1997. In order to ascertain the cause of incident, the investigation has been pushed forward. During investigation, we obtained essential information from operators, such as softness of bituminized product, white smoke generated from bituminized product. This condition has never been observed comparing past normal operation. Therefore, we assumed that temperature of bituminized product had increased more than expected. In order to confirm above assumption, we made experiment for obtaining the relationship between temperature and fluidity of bituminized product. Simulated bituminized product was heated up to each temperature (210, 230, 250, 270C) in a pot and poured down into an another pot. We observed the fluidity of bituminized product when it flowing down into a pot. The fluidity of bituminized product increased with high temperature. The fluidity of bituminized product at 270C looked similar to fluidity of bituminized product that had ignited itself at the incident. White smoke generated from bituminized product and amounts of white smoke increased with high temperature. The smoke was considered to be gas that generated through thermal decomposition or volatilization of bitumen.
Sazarashi, Masami*; *; Ikeda, Yasuhisa*; Kumagai, Mikio*; *; *
PNC TJ1564 97-002, 20 Pages, 1997/03
None
Toyohara, Masumitsu*; Hirayama, Fumio*; Tamura, Toshiyuki*; Fukazawa, Takuji*; Igarashi, Noboru*
PNC TJ8164 96-010, 213 Pages, 1996/03
no abstracts in English
Sazarashi, Masami*; Ikeda, Yasuhisa*; Kumagai, Mikio*; *; *
PNC TJ1564 96-002, 19 Pages, 1996/03
None